Description:-
This is a flexible E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
Compared with normal e-Paper panels, this flexible panel allows bending without being damaged, and it's thinner and lighter.
Combined with the advantages like ultra low power consumption, wide viewing angle, clear display without electricity
It is an ideal choice for applications where curved surface display is required, such as industrial instruments, smart wearable-devices, and so on.
This is a flexible E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with an embedded controller, communicating via SPI interface, supports partial refresh.
Compared with normal e-Paper panels, this flexible panel allows bending without being damaged, and it's thinner and lighter.
Combined with the advantages like ultra-low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications where the curved surface display is required, such as industrial instruments, smart wearable devices, and so on.
No backlight keeps displaying last content for an extended time even when power down Ultra-low power consumption
Basically power is merely required for refreshing Compatible with Raspberry Pi 2B/3B/Zero/Zero W Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleon, etc.
This product is an E-paper device adopting the image display technology of Microencapsulated Electrophoretic Display, MED.
The initial approach is to make tiny spheres, during which the charged colour pigments are suspending within the transparent oil and would move counting on the electronic charge.
The E-paper screen display patterns by reflecting the ambient light, so it's no background light requirement. (Note that the e-Paper cannot support updating directly under sunlight).
Applications:
- Education: Digital school books
- Wristwatches
- E-Books
- Newspaper
- Cell phones
- Status display
Features:
- Flexible e-Paper, the display section is bendable (DON'T bend the FPC section)
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
- Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Specifications:-
- Operating voltage: 3.3V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimension: 59.2mm × 29.2mm × 0.3mm
- Display size: 23.71mm × 48.55mm
- Dot pitch: 0.229 × 0.228
- Resolution: 212 × 104
- Display color: black, white
- Grey level: 2
- Full refresh time: 2s
- Refresh power: 26.4mW(typ.)
- Standby power: <0.017mW
- Viewing angle: >170°
Product Includes:-
1x 2.13 inch e-Paper HAT(D)
1xRPi screws pack (2pcs)
1x PH2.0 20cm 8Pin
1x e- Paper Driver HAT