ST LINK V2 in-circuit Debugger/Programmer for STM8 and STM32.
ST LINK V2 in-circuit Debugger/Programmer for STM8 and STM32.
ST LINK V2 in-circuit Debugger/Programmer for STM8 and STM32.

ST LINK V2 in-circuit Debugger/Programmer for STM8 and STM32

Rs. 755.00
Add to Wishlist

Checkout securely with

SKU: BE01588
Availability : In Stock Pre order Out of stock
Description
Description:-
The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families.
The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
Specifically the debugger incorporates the use of USB full-speed interface to communicate with the ST Visual Develop (STVD) or ST Visual Program (STVP) software for STM8 application, and use of the USB full speed.

Specifications:-
Support STM32 SWD interface debugging
Support STM8 all series download
Support firmware auto upgrade
With cover case for protection, anti-dust and anti-short circuit
Small size: 50*28*14mm
5 V power supplied by a USB connector
USB 2.0 full-speed-compatible interface
USB standard A to Mini- B cable
Features:
1.65 V to 5.5 V application voltage supported on SWIM interface
SWIM low-speed and high-speed modes supported
SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
SWIM cable for connection to the application via an ERNI standard vertical connector (ref: 284697 or 214017) or horizontal connector (ref: 214012)
JTAG/serial wire debugging (SWD) specific features:
1.65 V to 3.6 V application voltage supported on the JTAG/SWD interface and 5 V tolerant inputs
JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector
JTAG supported
SWD and serial wire viewer (SWV) communication supported
Direct firmware update feature supported (DFU)
Status LED which blinks during communication with the PC
Operating temperature 0 to 50 ?C
1000 Vrms high isolation voltage (ST-LINK/V2-ISOL only)

Package Includes:-
1x ST-LINK V2 Emulator
1x Mini USB T-plug cable
1x FRC cable with 20 pin connector
1x Dual Female connectors

  • 5 V power supplied by a USB conne
  • USB 2.0 full-speed-compatible interface
  • USB standard A to Mini- B cable
  • Support STM32 SWD interface debugging
  • Support STM8 all series download