CP2102 USB TO SERIAL RS232 & TTL UART CONVERTER MODULE
Checkout securely with
Description:-
Connect the USB A to B Cable to USB B socket of the module and USB port of the computer, install drivers and you will be assigned a COM port through which you can communicate as you do through a SERIAL port.
You can easily communicate with microcontrollers / microprocessors from your computer through the module.
If you need TTL pins for communication, you can find TX, RX and GND points on board, solder 3 berg sticks and connect it to TTL pins of microcontrollers for direct communication without DB9 connector (No need to use MAX232 / MAX3232 for RS232 to TTL conversion in this case)
Applications
Easily connect computer with all Micro-controller Units (MCU) (Supports 3.3V & 5V)
All kinds of satellites set-top box upgrade
Router, HDD, ADSL, broad band modem firmware upgrade or cracked upgrade
Cellphone, XBOX360, GPS serial communication, vehicle inspection and test, DVD flash, etc
Burn write STC MCU, NXP MCU, renesas MCU, NEC MCU, etc
Simple UART communication, used in UART debugging tools like putty, hyper terminal, etc
USB signal can be transferred to both RS232 & TTL signals, may be used by electronic enthusiasts
Specifications:-
RS232 with DB9 connector + TTL points on board
CP2102 Based - Better and Faster than Cheap PL2303 based boards
USB specification 2.0 compliant with full-speed 12Mbps.
Supports all Windows (Above Win98), Mac OS (Above 9) & Linux (Above 2.x.x)
Baud rates: 300 bps to 1 Mbps.
Byte receive buffer: 640 byte transmit buffer.
Create virtual COM port and connect your old devices which use serial port communication
Compatible with both 3.3V & 5V levels
LED indication (ON only when port is opened and being used, otherwise OFF)
Temperature Range: -40 to +85.
Product Includes:-
1x CP2102 USB 2.0 to Serial RS232 + TTL UART Converter Module