CP2102 USB TO SERIAL RS232 & TTL UART CONVERTER MODULE

Connect the USB A to B Cable to USB B socket of the module and USB port of the computer, install drivers and you will be assigned a COM port through which you can communicate as you do through a SERIAL port. 

You can easily communicate with microcontrollers / microprocessors from your computer through the module.

If you need TTL pins for communication, you can find TX, RX and GND points on board, solder 3 berg sticks and connect it to TTL pins of microcontrollers for direct communication without DB9 connector (No need to use MAX232 / MAX3232 for RS232 to TTL conversion in this case)

Applications

• Easily connect computer with all Micro-controller Units (MCU) (Supports 3.3V & 5V)
• All kinds of satellites set-top box upgrade
• Router, HDD, ADSL, broad band modem firmware upgrade or cracked upgrade
• Cellphone, XBOX360, GPS serial communication, vehicle inspection and test, DVD flash, etc
• Burn write STC MCU, NXP MCU, renesas MCU, NEC MCU, etc
• Simple UART communication, used in UART debugging tools like putty, hyper terminal, etc
• USB signal can be transferred to both RS232 & TTL signals, may be used by electronic enthusiasts

Specifications:-

• RS232 with DB9 connector + TTL points on board
• CP2102 Based - Better and Faster than Cheap PL2303 based boards
• USB specification 2.0 compliant with full-speed 12Mbps.
• Supports all Windows (Above Win98), Mac OS (Above 9) & Linux (Above 2.x.x)
• Baud rates: 300 bps to 1 Mbps.
• Byte receive buffer: 640 byte transmit buffer.
• Create virtual COM port and connect your old devices which use serial port communication
• Compatible with both 3.3V & 5V levels
• LED indication (ON only when port is opened and being used, otherwise OFF)
• Temperature Range: -40 to +85.

Product Includes:-

1x CP2102 USB 2.0 to Serial RS232 + TTL UART Converter Module