12864 DISPLAY 128*64 (BLUE)

The 12864B Graphic LCD module is a 128 x 64 pixel LCD display with a blue backlight and white foreground. 

The display is fully programmable and can display a combination of both graphics and text. It can operate in both parallel and serial (SPI) modes which can be configured by the external pin PSB.

In SPI mode only 3 data pins are required to drive this display. This 12864B LCD is a big, bold, beautiful blue LCD with white back-lit pixels. It is also well known for its wide use in 3D Printers, an extension accessory of RAMPS. If you want to add some visual output to your Arduino projects, you’ll need a display.

This LCD display is best suited the graphical upgrade to those popular 16×2 LCDs but allows full graphical control. The 12864B V2.0 is based on ST7920 controller. A fairly popular controller used for Arduino.

This display works on SPI. It is easy to use and compatible with the majority of microcontrollers out there. You can do tons of graphics stuff with this display. You can create frames and even make small animations.

Note that the displays expect individual pixels to be turned ON/OFF.

It doesn't support ASCII Inputs just like the character display. It may sound sort of a disadvantage but it's not. It are often wont to create beautiful fonts of any sizes you would like . You need to store these fonts in the microcontroller and send then to the display. We have tutorials which will assist you do that fairly easily. The 12864B Graphic LCD module may be a 128 x 64 pixel LCD display with a blue backlight and white foreground. The display is fully programmable and may display a mixture of both graphics and text.

It can operate in both parallel and serial (SPI) modes which may be configured by the external pin PSB. In SPI mode only 3 data pins are required to drive this display. This LCD may be a big, bold, beautiful blue LCD with white back-lit pixels. It is also documented for its wide use in 3D Printers, an extension accessory of RAMPS. If you would like to feature some visual output to your Arduino projects, you’ll need a display. This LCD display is best suited the graphical upgrade to those popular 16×2 LCDs but allows full graphical control.

In addition to writing text, this graphic LCD series allows the user to draw lines, circles, and boxes, set or redefine individual pixels, clear specific blocks of the display, backlight control, and adjustment of the baud rate. The LCD 12864b (128×64) Graphic Blue Color Backlight LCD Display module has its pins which are documented on the back of the LCD to assist in wiring it up. It is very easy to interface this LCD with RAMPS controller of the 3D printer.

Specifications:-

• Display  128x64
• Backlight: Blue
• Size: 93 X 70 X 14 mm
• Voltage: 5V
• Viewing Direction : 6 O’clock 
• Backlight Color : White 
• Display Content : 128*64 Dots 
• Storage temperature : -30℃ to +80℃
• Power Supply for logic : 5V
• VLCD : 9.0V 
• Operation temperature : -20℃ to +70℃ 

Product Includes:-

1x 12864 DISPLAY 128*64 (BLUE)