Delta Industrial Power Supply SMPS 24V 6.25A 150W PMT-24V150W2BA

Output Current:

6.25A

Output Voltage:

24V

Output Voltage Adjustment Range:

21.6-26.4Vdc

Output Power:

150W

Line Regulation:

± 0.5% typ. @ 100-132Vac, 180-264Vac (Selectable by Switch)

Load Regulation:

± 0.5% typ. @ 100-132Vac, 180-264Vac (Selectable by Switch)

PARD:

< 200mVpp @ 0°C to 70°C, 600mVpp typ. @ -30°C to 0°C

Start-up Time:

500ms typ. @ 115Vac & 230Vac

Hold-up Time:

30ms typ. @ 115Vac & 230Vac

Dynamic Response (Overshoot & Undershoot O/P Voltage):

± 10% @ 115 & 230Vac input, 10-100% load (Slew Rate: 2.5A/μS, 50% duty cycle @ 5Hz & 10KHz)

Start-up with Capacitive Loads:

8,000µF Max

Rise Time:

30ms typ. @ 115Vac & 230Vac

Nominal Input Voltage:

100-120Vac, 200-240Vac (Selectable by Switch)

Input Voltage Range:

90-132Vac, 180-264Vac (Selectable by Switch)

Nominal Input Frequency:

50-60Hz

Input Frequency Range:

47-63Hz

Input Current:

3A typ. @ 115Vac, 1.7A typ. @ 230Vac

Efficiency at 100% load:

89.0% typ. @ 230Vac

Max Inrush Current:

60A typ. @ 230Vac

Leakage Current:

< 0.5mA @ 240Vac/50Hz

Case Chassis / Cover:

Aluminium / SGCC

Indicator:

Green LED (DC OK)

Cooling System:

Convection

Noise Sound Pressure Level (SPL):

< 25dBA

Wire:

AWG 18-12

Unit Weight:

0.354 kg (0.78 lb)

Dimensions:

159 x 97 x 30 mm

6.26” x 3.82” x 1.18”

Vibration (Operating):

IEC 60068-2-6, Sine Wave: 20Hz to 500Hz (5G); 10min per cycle, 60min for each axis (X, Y,Z)

Shock Test (Operating):

IEC 60068-2-27, Half Sine Wave: 10G for a duration of 11ms, 3 shock for each 3 directions.

Operating Temperature:

-30°C to +70°C (-40°C Cold Start)

Storage Temperature:

-40°C to +85°C

Power De-rating:

> 50°C de-rate power by 2% / °C

< -25°C de-rate power by 4% / °C @ 100Vac

< 100Vac de-rate power by 1.33% / V (86.67% load @ 90Vac)

Operating Humidity:

20 to 90% RH (Non-Condensing)

Shock Test (Non-Operating):

IEC 60068-2-27, Half Sine Wave: 50G for a duration of 11ms, 3 shocks for each 3 directions

Vibration (Non-Operating):

IEC 60068-2-6, Random: 5Hz to 500Hz (2.09G); 20 min per axis for all X, Y, Z direction

Operating Altitude:

0 to 5,000 Meters (16,400 ft.)

Pollution Degree:

3

Over Voltage Category:

II (Compliance to EN 62477-1 OVC III with 2000 meters altitude)

Overvoltage:

26.4-33.6V SELV Output, Latch Mode

Overload / Overcurrent:

110-175% of rated load current, Hiccup Mode, Non-Latching (Auto-Recovery)

Over Temperature:

Latch Mode

Short Circuit:

Hiccup Mode, Non-Latching (Auto-Recovery when the fault is removed)

Protection Against Shock:

Class I with Primary Earth connection

MTBF:

> 700,000 hrs as per Telcordia SR-332 I/P: 230Vac, O/P: 100% Load, Ta: 25°C)

Expected Cap Life Time:

10 years (230Vac, 50% load @ 40°C)

Electrical Safety:

TUV Bauart: EN 62368-1, EN60335-1, EN 61558-1/-2-16

cULus: UL 62368-1 and CAN/CSA C22.2 No. 62368-1

CB scheme: IEC 62368-1, IEC 60950-1, IEC 60335-1, IEC 61558-1/-2-16

CCC: GB 4943.1 KC: K 60950-1

EAC: TP TC 004/2011

BSMI: CNS 14336-1

CE:

In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU

Galvanic Isolation:

Input to Output: 4.0 KVac

Input to Ground: 2.0 KVac

Output to Ground: 1.25 KVac

Safety Entry Low Voltage:

SELV

UKCA:

In conformance with Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016

Emission:

(CE & RE)

CISPR 32, EN/BS EN 55032, EN/BS EN 61000-6-4, KN32, AS/NZS CISPR32)

Compliance to EN/BS EN 55014-1, FCC Title 47, EN/BS EN 61000-6-3 : Class B

Immunity:

EN/BS EN 55035, KN35, EN/BS EN 61000-6-2)

Compliance to EN/BS EN 55014-2,EN/BS EN 61000-6-1

Harmonic Current Emissions:

IEC/EN/BS EN 61000-3-2, Class A

Voltage Fluctuation and Flicker:

IEC 61000-4-11