DIP 3 Color LED Module
Including GST (No Hidden Charges)
Checkout securely with
Description
This module consists of a 5mm RGB LED and three 150Ω limiting resistors to prevent burnout. Adjusting the PWM signal on each color pin will result in different colors.
This is a DIP 3 Color LED Module. Through the PWM adjusting, three primary colours can be mixed to obtain different colors.
Connect the red pin (R) on the KY-016 to pin 11 on the Arduino. Blue (B) to pin 10, green (G) to pin 9 and ground (-) to GND. Notice that you do not need to use limiting resistors since they are already included on the board.
Connection Diagram:
Pin Connection with Arduino:
| LED module | Arduino |
| R | Pin 11 |
| B | Pin 10 |
| G | Pin 9 |
| – | GND |
Features :
- The use of plug-in full-colour LED.
- RGB trichromatic limiting resistor to prevent burnout.
- With a variety of single-chip interface.
- Through the PWM adjusting, three primary colours can be mixed to obtain different colours
- The working voltage: 5V
Specification:-
| Operating Voltage (VDC): |
5 |
|---|---|
| LED Type and Size |
RGB 5 mm |
| LED drive mode |
Common Cathode Driver |
| PCB Width |
1.5mm |
| Length (mm): |
20 |
| Width (mm): |
15 |
| Height (mm): |
15 |
| Weight (g): |
5 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 3 × 2 × 1 cm |
Package Includes :
1 x DIP 3 Color LED Module.
DIP 3 Color LED Module