E-Paper 2.13" HAT C Display Module - Robodo
E-Paper 2.13" HAT C Display Module - Robodo
E-Paper 2.13" HAT C Display Module - Robodo
E-Paper 2.13" HAT C Display Module - Robodo

E-Paper 2.13" HAT C Display Module

Rs. 1,592.00

Including GST (No Hidden Charges)

Add to Wishlist

Checkout securely with

SKU: BE02080
Availability : In Stock Pre order Out of stock
Description

Description:- 

This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports yellow, black, and white three-color display.

Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

2.13Inch E-Paper Hat (C) is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports yellow, black, and white three-color display.

Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

This product is an E-paper device adopting the image display technology of Microencapsulated Electrophoretic Display, MED.

The initial approach is to make tiny spheres, during which the charged colour pigments are suspending within the transparent oil and would move counting on the electronic charge.

The E-paper screen display patterns by reflecting the ambient light, so it has no background light requirement.

Due to the advantages like ultra-low power consumption, wide viewing angle, the great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features No backlight, keeps displaying last content for an extended time even when power down Ultra-low power consumption, basically power is merely required for refreshing Compatible with Raspberry Pi 2B/3B/Zero/Zero W Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.

Comes with development resources and manual examples for Raspberry/Arduino/STM32)

Applications:

  • Education: Digital school books
  • Wristwatches
  • E-Books
  • Newspaper
  • Cell phones
  • Status display

Features:

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specification:-

  • Operating voltage: 3.3V/5V
  • Interface: 3-wire SPI, 4-wire SPI
  • Outline dimension: 65mm × 30.2mm
  • Display size: 23.71mm × 48.55mm
  • Dot pitch: 0.229 × 0.228
  • Resolution: 212 × 104
  • Display color: yellow, black, white
  • Grey level: 2
  • Full refresh time: 15s
  • Refresh power: 26.4mW(typ.)
  • Standby power: <0.017mW
  • Viewing angle: >170°

Product Includes:-

1x 2.13-inch e-Paper HAT(C)

1x RPi screws pack (2pcs)

1x PH2.0 20cm 8Pin