Eklektik Brushless Motor Controller DC 12V-36V 500W 15A Hall BLDC Motor Balanced Car Driver Board

The Eklektik Brushless Motor Controller DC 12V-36V 500W 15A Hall BLDC Motor Balanced Car Driver Board is a specialized electronic component designed to control brushless DC (BLDC) motors for applications like electric vehicles, robotics, and RC cars. This controller is often used to drive BLDC motors with Hall effect sensors that provide feedback for smooth, efficient, and precise motor control.

Eklektik Brushless Motor Controller DC 12V-36V 500W 15A Hall BLDC Motor Balanced Car Driver Board.

1. The motor speed control wiring methods: available potentiometer system speed can also be connected to the MCU control, when the potentiometer control wiring, the potentiometer middle pin is connected to VR speed port, potentiometer connected to both ends of 5V and GND terminal voltage more high speed faster. 
2. Motor steering control wiring methods: you can switch control can also be connected to the MCU control, to GND in one direction, then in one direction 5V.

Tips:

If you use less than 60W, without additional heat sink , be sure to add more than 60W
We recommend cooling surface area greater than 200 square centimeters. Proposes to add insulation films, both sides of the insulating sheet plus thermal grease.

Features:

• Voltage Range: Supports 12V to 36V DC input.
• Current Rating: Max 15A, suitable for motors up to 500W.
• Hall Sensor Compatibility: Works with Hall effect sensors for precise motor control.
• Smooth Operation: Uses FOC or six-step commutation for smooth, efficient motor control.
• Protection Features: Includes overcurrent, overvoltage, undervoltage, and overtemperature protection.
• Speed & Direction Control: Adjustable speed via PWM and direction control.

Applications:

• Electric Vehicles (EVs): Used in electric cars, e-bikes, and e-scooters.
• RC Cars: Provides motor control for radio-controlled cars.
• Robotics: Ideal for robotic vehicles or robot arms with precise motor needs.
• Drones: Used in drones for efficient, high-performance motor control.

Specification :-

• Operating voltage: DC 12V-36V
  
• Operating Current: 15A
  
• Driver Power: 500W
  
• Speed Voltage: 0.1V-5V
  
• Operating Temperature:-40-85 degC
  
• Humidity: 90%RH
  
• Stall protection:Yes
  
• Enable Control: Yes
  
• Over-current protection: Yes
  
• Steering control: Yes
  
• Speed control signal: Yes
  
• Probe size 3mm, 
  
• length: fixing hole center distance 57mm. 
  
• width:fixed hole center distance 36.5m

Product Includes:-

 1 X Eklektik Brushless Motor Controller DC 12V-36V 500W 15A Hall BLDC Motor Balanced Car Driver Board