Hi-Link Power Module - HLK 12M12

Hi-Link Power Module - HLK 12M12

Features:

• Ultra-thin, ultra-small, smallest volume in the industry
• Global universal input voltage (90~245Vac)
• Low power consumption, environmental protection, no-load loss <0.1W
• Low ripple and low noise
• Wide range input: 85-305VAC/120-432VDC
• Input and output isolation withstand voltage 3000VAC
• No-load power consumption ≤0.1W
• High efficiency, conversion efficiency up to 86% (Typ)
• Operating temperature range: -25°C~+75°C
• Fully enclosed plastic housing, in line with UL94V-0 level
• Good output short circuit and over current protection and self-recovery
• International standard pin, PCB board in-line installation
• Potting and sealing with high-quality environmentally friendly waterproof and thermal conductive glue, dustproof, moistureproof, shockproof and flame retardant
• Meet UL/CE/EMC and safety testing requirements
• Can be used in medical, industrial control, electric power, instrumentation, communication, railway and other fields

Specifications:-

Environmental conditions:

• Operating temperature: -40~+75℃
• storage temperature: -40~+85℃
• Relative humidity: 10~90%RH
• Cooling method: Natural cooling
• Atmospheric pressure: 80~160Kpa
• Altitude: ≤2000m
• Vibration: Vibration coefficient 10~500Hz, 2G10min./1cycle60min.each along X,Y,Z axes
• Meet the requirements of secondary road transportation

Input characteristics (normal temperature test):

• Rated input voltage: 220VAC/310VDC
• Input voltage range: 85-305VAC/120-432VDC
• Input frequency range: 50Hz(typical)
• Input Current(max): 0.30A(115VAC)/0.15A(220VAC)
• Inrush current: 10A(115VAC)/20A(220VAC)
• Leakage current: 0.5mA TYP/230VAC/50Hz
• Recommended value of external fuse: 3.15A/250VAC slow break fuse
• Hot swap: not support
• Remote: No remote control

Output characteristics:

• Output voltage accuracy: ±1.0%（Tpy, input full voltage, any load）
• Linear adjustment rate(max): ±0.5 %（Nominal load）
• Load Regulation(max): ±1.0 %（Nominal voltage, 20%~100% load）
• No-load power consumption: 0.1W(Input 115/220VAC)
• Start delay time: 100mS(Input nominal voltage/full load)
• Power-down hold time: 10mS(115VAC)/60mS(220VAC)
• Output short circuit protection: Sustainable, self-healing
• Ripple & noise: ≤100mVp-p(Tpy:50)

Package Includes:-

1x HLK-HLK-12M12 Hi-Link 12V 12W AC to DC Power Supply Module