Leadshine DMA860E 7.2A Stepper Motor Driver DC 24-80V for 86/110 2-Phase Stepper

  • Sale
  • Regular price Rs. 4,700.00
Tax included.

The DMA860E is a digital stepper drive with simple design and easy setup. By implementing Leadshine advanced stepper control technology, this stepper drive is able to power 2-phase and 4 phase stepper motors smoothly with optimal torque and low motor heating & noise. Its operating voltage is 18-80VAC or 24-110VDC and it can output up to 7.2A current. All the micro step and output current are done via DIP switches. Therefore, the DMA860E are ideal choices for applications requiring simple step & direction control of NEMA 23, 24, 34, and 42 stepper motors.

Features -
Anti-Resonance for optimal torque, smooth motion, low motor heating and noise.
Motor auto-identification and parameter auto-configuration for optimal torque from wide-range motors.
Step & direction (PUL/DIR) and CW/CCW (via internal jumper set) control. Step & direction by default Multi-Stepping for smooth motor movement.
Opto Isolation for input control signals.
Input voltage 18-80VAC or 24-110VDC.
16 selectable micro-step resolutions of 400-51,200 via DIP switches.
8 selectable output current settings of 2.4 – 7.2A via DIP switches.
Soft-start with no “jump” when powered on.
Pulse input frequency up to 200 KHz. TTL compatible and optically isolated inputs.
Automatic idle-current reduction.
Protections for over-voltage and over-current.

Specifications -
Model: DMA860E.
Phase: 2.
Control Mode: Step & Direction.
Max Input Frequency: 200KHz.
Input Voltage Range: 18 - 80 VAC / 24 - 110 VDC.
Suggested Power Supply Voltage Range: 36-90 VDC /24-60 VAC.
# of DIP Switch Resolution Configurations: 16.
DIP Switch Resolution Setings: 400, 800, 1600, 3200, 6400, 12800, 25600, 51200, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 40000.
# of DIP Switch Current Configurations: 8.
DIP Switch Current Configurations: 2.40A, 3.08A, 3.77A, 4.45A, 5.14A, 5.83A, 6.52A, 7.20A.
Logic Current Range: 7-16mA (10mA typical).
Logic Voltage Range: 4-5 VDC for pulse active high (default) , or 0-0.5V for pulse active low.
Pulse enabled at: Rising edge.
Idle Current Percentage: 50 %.
# of Digital Inputs: 3.
Step Width: 2,500 ns.
Minimal Direction Setup Time: 5,000 ns.
Isolation Resistance: 500M Ohm.
Environment: Avoid dust, oil fog and corrosive gases.
Ambient Temporature: 0-50°C.
Humidity: 40–95% RH.
Operating Temporature: 0-70°C.
Vibration: 5.9 m/s2 Max.
Storage Temporature: -20-65°C.
Specification: 5.94 X 3.82 X 2.24 Inches.
Weight: 1.13 lbs.