Mini ESP-M2 ESP8285 Serial Wireless WiFi Transmission Module SerialNET MODE Fully Compatible With ESP8266

Mini ESP-M2 ESP8285 Serial Wireless Wi-Fi Transmission Module Serial NET MODE Fully Compatible With ESP8266 designed based on an integrated chip specifically to fulfill the needs of a new connected world. ESP8285 is capable of delivering highly integrated Wi-Fi SoC solutions to meet users’ continuous demands for efficient power usage, compact design, and reliable performance in the Internet of Things industry.

ESP-M2 module core processor designed based on high-performance chip ESP8285. Basically, the ESP8285 module is an ESP8266 Module with an additional 1 MB of Flash memory. And the ESP8285 can even bear high temperatures up to 125℃ (the one for ESP8266 is just 85℃). More important, the code programmed in ESP8266 can also be used for ESP8285. The chip ESP825 is encapsulated in an advanced Tensilica’s L106 32-bit CPU, together with SRAM.

ESP8285 has the full and complete WiFi function with self-contained SOC and integrated TCP/IP protocol stack.  It gives access to any microcontroller to your WiFi network. This Module is capable of performing either as a standalone application or as a slave to a host MCU. When ESP8285 hosts the application, it promptly boots up from the flash. The integrated high-speed cache helps to increase system performance and optimize system memory. Also, ESP8285 can be applied to any microcontroller design as a Wi-Fi adaptor through SPI/SDIO or UART interfaces.  It can handle all the necessary overhead for communicating with your network, such as TCP/IP stack and communicating with your 802.11 b/g/n/e/I.networks.

Module interface:

• 2* UART.
• 1*ADC.
• 1*En.
• 1*wakeup pin.
• 1*HSPI.
• 1*I2C.
• 1*I2S.
• More than 10*GPIOs.

Applications

• Electrical appliance.
• Smart power plug, smart light.
• Infant monitor.
• Sensor networks.
• Security ID label.
• Wireless location beacon.
• Home automation.
• Mesh networks.
• IP video camera.
• Wearable electronics.
• Wireless location recognition

ESP8285 M2 WiFi IoT Module :

• SOC characteristics.
• Built-in Tensilica L106 ultra-low power 32-bit CPU, main frequency supports 80MHz and160MHz and RTOS.
• Built-in TCP/IP protocol.
• Built-in one-channel 10-bit high precision ADC.
• Outboard interface: HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO.
• The deep sleep current is 10uA, the cut-off current is smaller than 5uA.
• Wake, connect and transmit data package within 2ms.
• The consumer power is smaller 1.0Mw (DTIM3) when at standby status.
• Built-in 1M byte for SPI Flash.
• Ultra-small size.
• Support serial to WiFi.
• Wireless transparent transmission.
• Long-distance transmission with ultra-low power.
• Support outboard antenna.
• Bearing high temperature to 125 °C, compared to the 85°C for ESP8266.

WiFi characteristics.

• Support 802.11 b/g/n/e/I.
• Support Station, Soft AP, Soft AP+STA mode.
• Support WiFi Direct (P2P).
• Support CCMP (CBC-MAC, computation mode), TKIP (MIC, RC4), WAPI (SMS4), WEP (RC4), CRC etc., for hardware acceleration.
• P2P finding, P2P GO mode/ GC mode and P2P power management.
• WPA/PA2PSK and WPS.
• 11securitycertification: pre-certification and TSN.
• Support 802.11n (2.4GHz).
• 1h/RFC1042 frame encapsulation.
• Support seamless roaming.
• Support AT remote update and cloud update (OTA).
• Support Smart Config function (including Android and Ios device

Specifications:-

• Built-in Tensilica L106 ultra-low power 32-bit CPU, main frequency supports 80MHz and160MHz and RTOS.
•  Built-in TCP/IP protocol.
• Built-in one-channel 10-bit high precision ADC.
• Outboard interface: HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO.
• Deep sleep current is 10uA, the cut-off current is smaller than 5uA.
• Wake, connect and transmission data package within 2ms.
• The consumer power is smaller 1.0Mw (DTIM3) when at standby status.
• Built-in 1M byte for SPI Flash.
•  WiFi characteristics.
• Support 802.11 b/g/n/e/I.
• Support Station, Soft AP, Soft AP+STA mode.
• Support WiFi Direct (P2P).
•  Support CCMP (CBC-MAC, computation mode), TKIP (MIC, RC4), WAPI (SMS4), WEP (RC4), CRC etc., for hardware acceleration.
• P2P finding, P2P GO mode/ GC mode and P2P power manage.
• WPA/PA2PSK and WPS.
• 802.11securitycertification: pre-certification and TSN.
• Support 802.11n (2.4GHz).
•  802.1h/RFC1042 frame encapsulation.
  
  

Package Include:-

1x Mini ESP-M2 ESP8285 Serial Wireless Wi-Fi Transmission Module Serial NET MODE Fully Compatible With ESP8266