Robodo SIM800A Quad Band GSM/GPRS Module with RS232 Interface (BE0627)
Including GST (No Hidden Charges)
Checkout securely with
Descriptions:-
The SIM800A Module is a complete Quad-band GSM/GPRS solution in an LGA(Land grid array) type which can be embedded in the customer applications.
Support Quad-band 850/900/1800/1900 MHz, it can transmit Voice, SMS and data information with low power consumption.
With tiny size of 10x5.3x1.5 cm, it can fit into slim and compact demands of custom design.
The Module has SIM800A GSM chip and RS232 interface while enables easy connection with the computer using the USB to the Serial connector or microcontroller using the RS232 to TTL converter.
Once you connect the SIM800A modem using the USB to RS232 connector, you need to find the correct COM port from the Device Manager of the USB to Serial Adapter.
Then you can open Putty or any other terminal software and open a connection to that COM port at 9600 baud rate, which is the default baud rate of this modem.
Once a serial connection is open through the computer or your microcontroller you can start sending the AT commands.
When you send AT commands for example “ATr” you should receive back a reply from the SIM800A modem saying “OK” or other response depending on the command sent.
Application:
- Remote Data Monitor and Control
- Water, Gas and Oil flow metering
- Automatic Meter Reading
- Power station monitoring and control
- Remote POS terminals
- Traffic signals monitor and control
- Fleet management
Specifications:-
- Connectivity technologies: USB
- Quad-band 850/900/1800/1900MHz
- GPRS class 2/10
- Control via AT commands (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT command set)
- High-Quality Product (Not hobby grade)
- 5V interface for direct communication with MCU kit
- Configurable baud rate
- Built-in SIM Cardholder
- Built-in Network Status LED
- Inbuilt Powerful TCP/IP protocol stack for internet data transfer over GPRS
- Low power.
Product Includes:-
1x SIM800A GSM/GPRS Modem