SpeedyBee SB-STACK-F7V3-50A
Including GST (No Hidden Charges)
Checkout securely with
Built with a better Bluetooth/WiFi 2-in-1 chip for 33% faster wireless data transfer. Update FC firmware with your smartphone in just 1 minute! Connect this FC via Bluetooth and fully configure any setting forget flight/Emuflight/INAV as you want.
Features:
-
- Flash your firmware 33% faster wirelessly + full FC configuration
- Get your Blackbox data in 1 minute anytime, anywhere
- 500MB onboard Blackbox flash memory
- Change your motor direction wirelessly
Specification:-
Item Type: |
Flight Controller Stack |
---|---|
MCU Type |
STM32F722 |
IMU(Gyro) |
BMI270 |
USB |
Type-C |
Barometer |
BMP280 |
OSD Chip |
AT7456E chip |
BLE Bluetooth |
Supported. Used for Flight Controller configuration |
Flash |
500MB |
Camera Control Pad |
Yes(CC pad on the front side) |
Power Input |
3S – 6S Lipo |
Shipping Weight | 0.104 kg |
Shipping Dimensions | 12 × 6 × 3 cm |
Useful links:
How to connect 8-bit ESC to BLHeli_Suite
How to Setup Betaflight Firmware
Package Includes:
1 x SpeedyBee F7 V3 Flight Controller x 1
1 x SpeedyBee BL32 50A 4-in-1 ESC x 1
1 x DJI 6pin Cable(80mm) x 1
1 x SH 1.0mm 15mm-length 8pin Cable(for FC-ESC connection) x 1
5 x M3*8mm Silicone Grommets(for FC)
5 x M3*8.1mm Silicone Grommets(for ESC)
5 x M3*30mm Iner-hexagon Screws
5 x M3 silicone O Ring
5 x M3 Nylon Nut
1 x 35V 1500uF Low ESR Capacitor
1 x XT60 Power Cable(70mm)
1 x 4pin SH1.0 to 3+2pin JST1.25 FPV Cam Cable(30mm)
1 x 4pin SH1.0 to 3+2pin JST1.25 FPV Cam Cable(60mm)
1 x 4pin SH1.0 to 4pin JST1.25 FPV Cam Cable(60mm)
1 x 4pin SH1.0 Radio Receiver Cable(100mm)
1 x 4pin SH1.0 to 4pin SH1.0 Analog VTX Cable x
1 x 6pin SH1.0 GPS Module Cable without Connector on another end(100mm)
1 x 6pin SH1.0 GPS Module Cable Connector of another end